Differences

This shows you the differences between two versions of the page.

--- projects:3dprinting:anycubic_i3_mega:cura_bltouch_and_profile_settings [2020/10/29 13:25] – [1. Automatic bed calibration] admin
+++ projects:3dprinting:anycubic_i3_mega:cura_bltouch_and_profile_settings [2020/10/30 01:09] (current) – admin
@@ Line 36: / Line 36: @@
 | ..//Top/Bottom Line Width//  | 0.40  | 0.35  | 0.35  |  mm  |
 | ..//Infill Line Width//  | 0.40  | 0.35  | 0.35  |  mm  |
-| Initial Layer Line Width  | 140  | 140  | 140  |  %  |
+| Initial Layer Line Width  | 140  | 200  | 200  |  %  |
 ^ Shell ^^^^^
 | Wall Thickness  | 1.2  | 1.2  | 1.2  |  mm  |
@@ Line 76: / Line 76: @@
 | ..Support Speed  | 30  | 30  | 30  |  mm/s  |
 | Travel Speed  | 50  | 50  | 50  |  mm/s  |
-| //Initial Layer Speed//  | 25.0  | 20.0  | 20.0  |  mm/s  |
+| //Initial Layer Speed//  | 25.0  | 10.0  | 10.0  |  mm/s  |
 | Skirt/Brim Speed  | 40  | 40  | 40  |  mm/s  |
 | Enable Acceleration Control  | ✔  | ✔  | ✔  | |

Auditeon