projects:3dprinting:anycubic_i3_mega:cura_bltouch_and_profile_settings
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| projects:3dprinting:anycubic_i3_mega:cura_bltouch_and_profile_settings [2020/02/22 21:31] – [Cura Profile settings] admin | projects:3dprinting:anycubic_i3_mega:cura_bltouch_and_profile_settings [2020/10/30 01:09] (current) – admin | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | | [[projects: | ||
| + | |||
| ===== Cura Machine settings for BLTouch ===== | ===== Cura Machine settings for BLTouch ===== | ||
| Apart from adding the automatic BLTouch calibration before printing, there are many settings in Cura which affect printing quality. Keep in mind that even if BLTouch calibration is configured and executed correctly, printing quality may still be adverse due to other settings. | Apart from adding the automatic BLTouch calibration before printing, there are many settings in Cura which affect printing quality. Keep in mind that even if BLTouch calibration is configured and executed correctly, printing quality may still be adverse due to other settings. | ||
| Line 7: | Line 9: | ||
| - Cura settings -> Printer -> Manage printers\\ \\ {{: | - Cura settings -> Printer -> Manage printers\\ \\ {{: | ||
| - Machine Settings\\ \\ {{: | - Machine Settings\\ \\ {{: | ||
| - | - Place "G29 - Automatic Bed Leveling" | + | - Place "G29 - Automatic Bed Leveling" |
| ==== 2. Initial feed for sticking layer ==== | ==== 2. Initial feed for sticking layer ==== | ||
| Line 23: | Line 25: | ||
| The following " | The following " | ||
| - | ^ Parameter | + | ^ Parameter |
| - | | Comment | + | | Comment |
| - | ^ Quality | + | ^ Quality |
| - | | //Layer Height// | + | | //Layer Height// |
| - | | //Initial Layer Height// | + | | //Initial Layer Height// |
| - | | //Line Width// | + | | //Line Width// |
| - | | ..//Wall Line Width// | + | | ..//Wall Line Width// |
| - | | ....//Outer Wall Line Width// | + | | ....//Outer Wall Line Width// |
| - | | ....//Inner Wall(s) Line Width// | + | | ....//Inner Wall(s) Line Width// |
| - | | ..// | + | | ..// |
| - | | ..//Infill Line Width// | + | | ..//Infill Line Width// |
| - | | Initial Layer Line Width | 140 | 140 | + | | Initial Layer Line Width | 140 | 200 | 200 |
| - | ^ Shell ^^^^ | + | ^ Shell ^^^^^ |
| - | | Wall Thickness | + | | Wall Thickness |
| - | | ..Wall Line Count | 3 | 3 | | | + | | ..Wall Line Count | 3 | 3 | 3 | | |
| - | | Top/Bottom Thickness | + | | Top/Bottom Thickness |
| - | | ..Top Thickness | + | | ..Top Thickness |
| - | | ....Top Layers | + | | ....Top Layers |
| - | | ..Bottom Thickness | + | | ..Bottom Thickness |
| - | | ....Bottom Layers | + | | ....Bottom Layers |
| - | | Optimize Wall Printing Order | | | | | + | | Optimize Wall Printing Order | ✔ |
| - | | Fill Gaps Between Walls | Everywhere | + | | Fill Gaps Between Walls | Everywhere |
| - | | Horizontal Expansion | + | | Horizontal Expansion |
| - | | Enable Ironing | + | | Enable Ironing |
| - | ^ Infill ^^^^ | + | ^ Infill |
| - | | //Infill Density// | + | | //Infill Density// |
| - | | ..//Infill Line Distance// | + | | ..//Infill Line Distance// |
| - | | Infill Pattern | + | | Infill Pattern |
| - | | Infill Overlap Percentage | + | | Infill Overlap Percentage |
| - | | Infill Layer Thickness | + | | Infill Layer Thickness |
| - | | Gradual Infill Steps | 0 | 0 | | | + | | Gradual Infill Steps | 0 | 0 | 0 | | |
| - | ^ Material ^^^^ | + | ^ Material |
| - | | //Printing Temperature// | + | | //Printing Temperature// |
| - | | Printing Temperature Initial Layer | 0 | 0 | ºC | | + | | Printing Temperature Initial Layer | 0 | 0 | 0 | ºC | |
| - | | //Initial Printing Temperature// | + | | //Initial Printing Temperature// |
| - | | //Final Printing Temperature// | + | | //Final Printing Temperature// |
| - | | Build Plate Temperature | + | | Build Plate Temperature |
| - | | Build Plate Temperature Initial Layer | 60 | 60 | ºC | | + | | Build Plate Temperature Initial Layer | 60 | 60 | 60 | ºC | |
| - | | Enable Retraction | + | | Enable Retraction |
| - | | Retract at Layer Change | + | | Retract at Layer Change |
| - | | Retraction Distance | + | | Retraction Distance |
| - | | Retraction Speed | 40 | 40 | mm/s | | + | | Retraction Speed | 40 | 40 | 40 | mm/s | |
| - | ^ Speed ^^^^ | + | ^ Speed ^^^^^ |
| - | | //Print Speed// | + | | //Print Speed// |
| - | | ..//Infill Speed// | + | | ..//Infill Speed// |
| - | | ..//Wall Speed// | + | | ..//Wall Speed// |
| - | | ....//Outer Wall Speed// | + | | ....//Outer Wall Speed// |
| - | | ....//Inner Wall Speed// | + | | ....//Inner Wall Speed// |
| - | | ..//Top Bottom Speed// | + | | ..//Top Bottom Speed// |
| - | | ..Support Speed | 30 | 30 | mm/s | | + | | ..Support Speed | 30 | 30 | 30 | mm/s | |
| - | | Travel Speed | 50 | 50 | mm/s | | + | | Travel Speed | 50 | 50 | 50 | mm/s | |
| - | | //Initial Layer Speed// | + | | //Initial Layer Speed// |
| - | | Skirt/Brim Speed | 40 | 40 | mm/s | | + | | Skirt/Brim Speed | 40 | 40 | 40 | mm/s | |
| - | | Enable Acceleration Control | + | | Enable Acceleration Control |
| - | | Enable Jerk Control | + | | Enable Jerk Control |
| - | ^ Travel, Cooling, Support, Build Plate Adhesion, Dual Extrusion, Special Modes, Experimental ^^^^ | + | ^ Travel, Cooling, Support, Build Plate Adhesion, Dual Extrusion, Special Modes, Experimental |
| - | | All Default values | + | | All Default values |
projects/3dprinting/anycubic_i3_mega/cura_bltouch_and_profile_settings.1582403511.txt.gz · Last modified: 2020/02/22 21:31 by admin