Differences

This shows you the differences between two versions of the page.

--- projects:3dprinting:anycubic_i3_mega:redesign_hub_pcb_v1_v2_v3 [2020/11/08 18:54] – admin
+++ projects:3dprinting:anycubic_i3_mega:redesign_hub_pcb_v1_v2_v3 [2020/11/09 01:03] (current) – [Mega Hub PCB v1] admin
@@ Line 15: / Line 15: @@
   * {{ :projects:3dprinting:anycubic_i3_mega:i3_mega_hub2-pinout.pdf|Pinout / Pin description of the connectors at the circuit board.}}
+The Anycubic I3 Mega enclosure needs to be slightly modified to give some space to the D-sub connectors. For this holes need to be cut in the metal casing. The following file can be helpful here:
+  * {{ :projects:3dprinting:anycubic_i3_mega:i3_mega_hub2-outline.pdf|I3 MEGA HUB2 outline.}}
 ===== Mega Hub PCB v2 =====
 Specially for adding a [[projects:3dprinting:anycubic_i3_mega:cable_chain|cable chain]] to the printer, a further redesign of the circuit board (I3 MEGA HUB3) was made

Auditeon