Differences

This shows you the differences between two versions of the page.

--- projects:3dprinting:anycubic_i3_mega:replacing_atmega2560 [2020/03/16 12:57] – [Flashing with avrdude] admin
+++ projects:3dprinting:anycubic_i3_mega:replacing_atmega2560 [2022/02/04 12:40] (current) – [Install avrdude] admin
@@ Line 9: / Line 9: @@
 |  {{:projects:3dprinting:anycubic_i3_mega:img_20200312_102818.jpg?400}}  |
-This is the wiring connection between the AVR Dragon and the Trigorilla ISP connector:
+This is the wiring connection between an AVR Dragon and a Trigorilla ISP connector:
 ^   AVR Dragon ISP (pin)  ^  Trigorilla ISP connector (pin)  ^
 |  1: MISO  |  1: D50 (Mega2560 pin 22)  |
@@ Line 17: / Line 17: @@
 |  5: RESET  |  5 RESET (Mega2560 pin 30)  |
 |  6: GND  |  6: GND  |
+(Pin marking is given on the silk-screen)
 For flashing the bootloader, download and install avrdude:
@@ Line 28: / Line 30: @@
 <code bash>
-gunzip -c avrdude-6.3.tar.gz | tar xf -
+# Dependencies
-cd avrdude-6.0
+sudo apt-get update
+sudo apt-get install build-essential bison flex automake libelf-dev libusb-1.0-0-dev libusb-dev libftdi-dev libftdi1
+mkdir -p $HOME/SOMEWHERE/apps/avrdude
+cd !$
+wget http://download.savannah.gnu.org/releases/avrdude/avrdude-6.4.tar.gz
+tar xzf avrdude-6.4.tar.gz
+# See here https://www.gnu.org/savannah-checkouts/gnu/bash/manual/bash.html#Word-Designators
+# for an explanation about word designaters in bash
+cd !$:r:r
 ./configure
 make
-su root -c 'make install'
+sudo make install
 </code>