projects:3dprinting:anycubic_i3_mega_getting_and_adapting_firmware:arduino_250000bps
Differences
This shows you the differences between two versions of the page.
| projects:3dprinting:anycubic_i3_mega_getting_and_adapting_firmware:arduino_250000bps [2021/05/01 15:22] – created admin | projects:3dprinting:anycubic_i3_mega_getting_and_adapting_firmware:arduino_250000bps [2021/05/01 15:28] (current) – admin | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| + | | [[projects: | ||
| + | |||
| ====== Using serial console within arduino IDE at 250000 baud ====== | ====== Using serial console within arduino IDE at 250000 baud ====== | ||
| The serial terminal application which is able to handle the non-standard 250000 baudrate, is the one included in the Arduino IDE. However with a workaround.((Without experimenting further, maybe the root cause has to do with the "auto reset on serial connection", | The serial terminal application which is able to handle the non-standard 250000 baudrate, is the one included in the Arduino IDE. However with a workaround.((Without experimenting further, maybe the root cause has to do with the "auto reset on serial connection", | ||
projects/3dprinting/anycubic_i3_mega_getting_and_adapting_firmware/arduino_250000bps.1619875365.txt.gz · Last modified: 2021/05/01 15:22 by admin
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
