Differences

This shows you the differences between two versions of the page.

--- projects:3dprinting:flashforge_creator_3_pro_fan_fix:dropbear [2025/04/10 18:11] – [Create a USB stick] admin
+++ projects:3dprinting:flashforge_creator_3_pro_fan_fix:dropbear [2025/04/11 15:47] (current) – [Create a USB stick] admin
@@ Line 75: / Line 75: @@
 ===== Create a USB stick =====
-To get SSH on the printer, we will create a special USB stick. Insert an empty FAT formatted USB stick in your PC and copy dropbear to the main directory:
+To get SSH on the printer, we need to put some files on a USB stick, mimicking as if the printer would do a firmware update. Insert an empty FAT formatted USB stick in your PC and copy dropbear to the main directory:
   cp output/target/usr/sbin/dropbear /media/$USER/USBSTOR/
@@ Line 208: / Line 208: @@
-Download the following files:
+After copying dropbear and flashforge_init.sh to a USB stick, download the following files from [[https://drive.google.com/file/d/11mXjpSDyMnloJLvtLTWBgSO6f1Hx_eiH/view?usp=drive_link|the official Flashforge 1.4.0 release]] and copy them to the USB stick as well.
   * 0014
   * end.img
@@ Line 214: / Line 214: @@
   * start.img
   * version.cfg
-  * dropbear   <-- Either use your own build or take this file
-  * flashforge_init.sh   <-- Either use the file which you created yourself or take this file
-From this link: [[https://www.auditeon.com/xyz/flashforge_dropbear_files.tar.bz2|flashforge_dropbear_files.tar.bz2]] and extract them to the USB stick.
+Alternatively you may download all the files together in one tar.bz2 archive from here [[https://www.auditeon.com/xyz/flashforge_dropbear_files.tar.bz2|flashforge_dropbear_files.tar.bz2]] and extract them to the USB stick.
 ===== Install dropbear to the printer =====
@@ Line 226: / Line 224: @@
   - Power on again. Dropbear should now be ready for use.
-Test the ssh connection to the printer with following user: root
+Test the ssh connection to the printer with following user: root\\
+The password for user root you should have already modified as described in the [[projects:3dprinting:flashforge_creator_3_pro_fan_fix:root_access|following page]].

Auditeon

User Tools

Site Tools

Differences

Page Tools