Differences

This shows you the differences between two versions of the page.

--- projects:3dprinting:flashforge_creator_3_pro_fan_fix:root_access [2024/10/23 17:25] – admin
+++ projects:3dprinting:flashforge_creator_3_pro_fan_fix:root_access [2025/04/10 00:15] (current) – [Getting root access] admin
@@ Line 36: / Line 36: @@
   - Format a usb stick to FAT32, download a [[https://industry.flashforge.com/download-center/96|Flashforge update file]] and extract all files to the usb stick.
   - Overwrite flashforge_init.sh with the one from above.
-  - Connect printer via serial connection. connect using 115200 8n1. E.g.:<code bash>
+  - Connect printer via serial connection at the mainboard. Connect using 115200 8n1. E.g.:<code bash>
     minicom -b 115200 -D /dev/ttyUSB0 -C serial_port_115200.pw_change.txt</code>
   - Insert usb stick in 3d printer and power-on
   - Verify kernel log messages output in minicom
   - Enter a new password when asked for.
-  - Wait until the music is finished. Power off printer. Remove usb stick and power on. try to login via serial. Connect using:\\ user: root\\ The password which was just entered.
+  - Wait until the music is finished. Power off printer. Remove usb stick and power on. try to login via serial. Connect using:\\ user: root\\ password: The password which was just entered.

Auditeon