Differences

This shows you the differences between two versions of the page.

--- projects:3dprinting:omni200:chitu_fx [2022/10/31 02:00] – admin
+++ projects:3dprinting:omni200:chitu_fx [2022/10/31 02:59] (current) – admin
@@ Line 9: / Line 9: @@
   * [[https://chitusystems.com/product/esp-01-wifi-module/]] wifi module
   * [[https://en.aliradar.com/item/4000935256869-3D-Printer-Motherboard-ChiTu-F-X-With-STM32-High-Stability]]
-  * [[https://projects:3dprinting:omni200:chitu_fx:chitu_fx_lcd_display_communication.zip]] Signal capture pictures of communication between controller and lcd (4.2MB)
 List of components:
@@ Line 15: / Line 14: @@
   * TMC2209: Stepper driver, [[https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2209_Datasheet_V103.pdf]]
   * WSF40N06 N-Ch. Mosfet, [[https://datasheet.lcsc.com/lcsc/1809291408_Winsok-Semicon-WSF40N06_C86291.pdf]]
-  * 3.5" TFT display module. ILI9341 based? If so, a similar pinout given here: [[https://www.raystar-optronics.com/3.2-3.5-3.9-tft-lcd-display/RFC350Y-AIW-DNS.html]]
+  * 3.5" TFT display module. Most likely((See the chitusystems webpage, [[https://chitusystems.com/product/tft-touch-screen/]] which shows a picture of the SSD1963 display controller)) it is the Solomon Systech SSD1963. A datasheet of the Solomon Systech SSD1963 can be found here: [[https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/908/Solomon-Systech-LCD-Controller-Data-Sheet.pdf|Solomon-Systech-LCD-Controller-Data-Sheet.pdf]]. Also, I ordered a 3.5" TFT display from Chitusystems and it is compatible to and works on the Chitu FX board.
     * XPT2046 Touchscreen controller: [[https://www.dzsc.com/uploadfile/company/785710/20111014212155973.pdf]]
     * (Original: TSC2046E-Q1 Touchscreen controller: [[https://www.ti.com/lit/ds/symlink/tsc2046e-q1.pdf]])
@@ Line 22: / Line 21: @@
       * [[https://mydiyelectronics.wordpress.com/tag/lcd/]]
       * [[http://www.lcdwiki.com/res/MRB3511/3.5inch_8&16BIT_Module_MRB3511_User_Manual_EN.pdf]]
+A logic analyzer capture of the communication between printer controller and lcd controller: (png images, 4.2MB) can be found here:
+  * [[https://www.auditeon.com/xyz/projects/chitu_fx_lcd_display_communication.zip]]
 <code>
@@ Line 49: / Line 51: @@
 PA15 -> Q20,P.G (E2_HOT)
 PB12 -> U4,P.12 (LCD RESET)
+PD14 -> U4,P.35 (LCD D0)
+PD15 -> U4,P.34 (LCD D1)
+PD0  -> U4,P.33 (LCD D2
+PD1  -> U4,P.32 (LCD D3)
+PE7  -> U4,P.26 (LCD D4)
+PE8  -> U4,P.11 (LCD D5)
+PE9  -> U4,P.10 (LCD D6)
+PE10 -> U4,P.9  (LCD D7)
+PE11 -> U4,P.25 (LCD D8)
+PE12 -> U4,P.24 (LCD D9)
+PE13 -> U4,P.23 (LCD D10)
+PE14 -> U4,P.22 (LCD D11)
+PE15 -> U4,P.21 (LCD D12)
+PD8  -> U4,P.20 (LCD D13)
+PD9  -> U4,P.10 (LCD D14)
+PD10 -> U4,P.18 (LCD D15)
+PB12 -> U4,P.12 (LCD RESET)
+  etc. (See below)
+>>>>>>>>>>>>>
+Todo:
+XPT2046,P.16 SPI1-SCK
+XPT2046,P.15 SPI1-_CS
+XPT2046,P.14 SPI1-MOSI
+XPT2046,P.12 SPI1-MISO
+XPT2046,P.11 SPI1-INT
+-> (U8,P.93/PG8) LIGHT PWM #B4
+-> (U8,P.118/PD4) LCD-nOE #B3
+-> (U8,P.119/PD5) LCD-nWE #B2 (Active low) ??
+-> (U8,P.87/PG2) RS #B1
+-> (U8,P.127/PG12) PS-CLK #B0 / Chip select ??
+<<<<<<<<<<<<<<
 U6_E1

Auditeon

User Tools

Site Tools

Differences

Page Tools