projects:repair:philips_pe1542_power_supply
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |||
projects:repair:philips_pe1542_power_supply [2019/10/28 00:26] – admin | projects:repair:philips_pe1542_power_supply [2019/10/28 00:28] (current) – [Service/Maintenance] admin | ||
---|---|---|---|
Line 24: | Line 24: | ||
Unfortunately, | Unfortunately, | ||
* Mount the 6 potentiometers on an aluminium L-profile, Mount the whole assembly on the front panel with two spacers. | * Mount the 6 potentiometers on an aluminium L-profile, Mount the whole assembly on the front panel with two spacers. | ||
- | * Mount each switch behind an existing switch, by removing the original contacts. | + | * Mount each switch behind an existing switch, by removing the original contacts. |
- | * On the main PCB, increase the 6 holes for the potentiometers to 12mm. The new potentiometers are too short and must be soldered using additional wires, as can be seen on the last picture below. | + | * On the main PCB, increase the 6 holes for the potentiometers to a diameter of 12mm. The new potentiometers are too short and must be soldered using additional wires, as can be seen on the last picture below. |
Below some pictures of the Philips PE 1542: | Below some pictures of the Philips PE 1542: |
projects/repair/philips_pe1542_power_supply.txt · Last modified: 2019/10/28 00:28 by admin