Differences

This shows you the differences between two versions of the page.

--- projects:routers:tp-link:tl-wr703n [2015/10/11 15:40] – [Increase flash memory] admin
+++ projects:routers:tp-link:tl-wr703n [2024/09/04 23:12] (current) – [Information and links] admin
@@ Line 246: / Line 246: @@
 For the system to recognize the interface please read more [[software:linux:jtag|here]]. To actually write to the eeprom, use [[http://flashrom.org/FT2232SPI_Programmer|flashrom]] which depends on libftdi.
+==== Connecting after flashing ====
+After the chip has been soldered onto the board and powered on, connect with telnet:
+  telnet 192.168.1.1
+Then set a password for root:
+  passwd
+Now it is possible to connect with ssh:
+  ssh root@192.168.1.1
 ===== Network configurations =====
   * [[http://wiki.openwrt.org/doc/recipes/bridgedclient]] Bridged Client
@@ Line 296: / Line 305: @@
 </code>
 ===== Information and links =====
-  * [[http://squonk42.github.com/TL-WR703N/|Complete schematic diagram of the TL-WR703N]] Including circuit board layout
+  * [[https://squonk42.github.io/TL-WR703N/|Complete schematic diagram of the TL-WR703N]] Including circuit board layout
   * [[http://wiki.openwrt.org/toh/tp-link/tl-wr703n]] Main openwrt page about TL-WR703N
   * [[http://wiki.openwrt.org/doc/howto/clientmode]] Explanation with images of different client modes

Auditeon