Differences

This shows you the differences between two versions of the page.

--- software:linux:jtag [2013/05/19 01:46] – [Intermezzo: JTAG clk signal integrity observations] admin
+++ software:linux:jtag [2015/10/11 20:03] (current) – [TIAO USB Multi Protocol adapter JTAG] admin
@@ Line 312: / Line 312: @@
 Unfortunately the output of this shows no success as it does at the OpenMoko board:
   Found Generic flash chip "unknown SPI chip (RDID)" (0 kB, SPI).
-Instead SPI2 at the TIAO tumpa board which is mapped to port B works better. Connections are:
+Instead use SPI2 at the TIAO tumpa board, which is mapped to port B. This works fine. Connections are:
-(SPI2->EEPROM)
+^ SPI2 ^ EEPROM ^
-  * MISO->DO
+| MISO  | DO  |
-  * VCC ->VCC+/HOLD+/WP
+| VCC  | VCC+/HOLD+/WP  |
-  * SCK ->CLK
+| SCK  | CLK  |
-  * MOSI->DI
+| MOSI  | DI  |
-  * CS  ->/CS
+| CS  | /CS  |
-  * GND ->GND
+| GND  | GND  |
 | {{ http://www.auditeon.com/xyz/auditeon/20130317_213801.IMG_0723.1024x796.jpg?385x300 |TIAO adapter with flash eeprom}} |

Auditeon