Auditeon

User Tools

Site Tools

Trace:
software:psion:installing_upgrades

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		Previous revision
software:psion:installing_upgrades [2007/11/23 17:35] – created acid_snoopsoftware:psion:installing_upgrades [2013/02/09 10:28] (current) – [Recovering from a broken nand rootfs] admin
Line 5: Line 5:
  
 Note the system only checks for the NBLXLoad.sh any special operation scripts must be called that to be run. Note the system only checks for the NBLXLoad.sh any special operation scripts must be called that to be run.
 +
  
 ==== Putting the Netbook LX images in nand ==== ==== Putting the Netbook LX images in nand ====
Line 37: Line 38:
 This will leave the "OS" partition (3MB (nand sectors 0-18), containing BooSt and the kernel) alone and erase the rest of the flash (except from the 4MB user partition - use fe8 instead of ee8 to nuke that too). The partition command defines the "OS" partition block e8 (ie being 3Mb - 18blocks for BooSt, the rest for the Kernel and Initrd). This will leave the "OS" partition (3MB (nand sectors 0-18), containing BooSt and the kernel) alone and erase the rest of the flash (except from the 4MB user partition - use fe8 instead of ee8 to nuke that too). The partition command defines the "OS" partition block e8 (ie being 3Mb - 18blocks for BooSt, the rest for the Kernel and Initrd).
  
-More details about the nand and BooSt commands to change it are in [[Using BooSt]].+More details about the nand and BooSt commands to change it are in [[software:psion:how_to_use_boost|Using BooSt]].
  
 Once the card and boost have been prepared, simply insert the cf card. If you observe on the serial console you should see the nand being programmed. Once programmed the boot should continue and the system should now be bootable from nand. Once the card and boost have been prepared, simply insert the cf card. If you observe on the serial console you should see the nand being programmed. Once programmed the boot should continue and the system should now be bootable from nand.
Line 47: Line 48:
 ==== Recovering from a broken nand rootfs ==== ==== Recovering from a broken nand rootfs ====
  
-The nand may be cleared by replacing the above NBLXLoad.sh script with the NBLXLoad-clear.sh from the krnbuild/nand/ directory (copies of the current version of these scripts are in the http://nexus.psiondev.com/~autobuild/ also). Note the script should still be called NBLXLoad.sh (i.e. you need to rename the script once copied) and should be removed if you continute to boot from the CF card or the erase will happen every time.+The nand may be cleared by replacing the above NBLXLoad.sh script with the NBLXLoad-clear.sh from the krnbuild/nand/ directory (copies of the current version of these scripts are in the %%http://nexus.psiondev.com/~autobuild/%% (Link is dead) also). Note the script should still be called NBLXLoad.sh (i.e. you need to rename the script once copied) and should be removed if you continute to boot from the CF card or the erase will happen every time.
  
 ==== Partitioning a suitable CF Card for nand and cf use ==== ==== Partitioning a suitable CF Card for nand and cf use ====
software/psion/installing_upgrades.1195835702.txt.gz · Last modified: 2008/05/14 17:54 (external edit)

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki