This page will describe how to install dropbear on the printer.
Buildroot options:
For dropbear we need a statically linked file. See here for more details how to setup accordingly.
Also see Chapter 17. Adding support for a particular board in the buildroot documentation. There it explains how to create a template for a new board.
In the ELF file of the play application, following library defines are shown:
000107c6 ds "GCC_3.5" 000107ce ds "GLIBC_2.4" 000107d8 ds "CXXABI_1.3" 000107e3 ds "GLIBCXX_3.4"