projects:3dprinting:anycubic_i3_mega:cable_chain
Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
| projects:3dprinting:anycubic_i3_mega:cable_chain [2020/03/08 23:03] – admin | projects:3dprinting:anycubic_i3_mega:cable_chain [2021/01/26 02:40] (current) – admin | ||
|---|---|---|---|
| Line 17: | Line 17: | ||
| ==== Y-Axis ==== | ==== Y-Axis ==== | ||
| The main concern with using a cable chain for the Y-axis is how to make a connection which is both capable of sustaining high currents, can be crimped, and is small to fit into a 3d-printed enclosure. | The main concern with using a cable chain for the Y-axis is how to make a connection which is both capable of sustaining high currents, can be crimped, and is small to fit into a 3d-printed enclosure. | ||
| - | For this, a suitable option would be to use unisolated cable-shoes. These are easy to source and easy to use with a 3d printed mounting base, which functions as a junction box. On the picture below a realization of this idea can be seen: | + | For this, a suitable option would be to use unisolated cable-shoes. These are easy to source and easy to use with a 3d printed mounting base, which functions as a junction box. On the picture below a first prototype |
| + | |||
| + | ^ Prototype | ||
| + | | {{: | ||
| + | |||
| + | To protect the open connections, | ||
| ^ Junction box - detail | ^ Junction box - detail | ||
| | {{: | | {{: | ||
| - | With the cover, mounted on the junction box and on the junction box mounted onto the aluminium profile, it looks like the following: | + | With the cover, mounted on the junction box and on the junction box mounted onto the aluminium profile, it looks like the following |
| ^ Junction box - closed | ^ Junction box - closed | ||
| | {{: | | {{: | ||
| Line 34: | Line 39: | ||
| - Aluminium Z-profile, 20x20x20, 2mm thickness, 45mm length | - Aluminium Z-profile, 20x20x20, 2mm thickness, 45mm length | ||
| - Cable chain, 10x10xR18 | - Cable chain, 10x10xR18 | ||
| - | - JST-XH connector & socket and 2-pin header to connect | + | - JST-XH connector & socket and 2-pin header to connect |
| - Cover, to be printed | - Cover, to be printed | ||
| - Junction box, to be printed, with 2x M3 tapered screw, 4x M3 nut, 2x washer, 2x spring washer | - Junction box, to be printed, with 2x M3 tapered screw, 4x M3 nut, 2x washer, 2x spring washer | ||
projects/3dprinting/anycubic_i3_mega/cable_chain.1583705001.txt.gz · Last modified: 2020/03/08 23:03 by admin
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
