This is an old revision of the document!

Flashforge creator 3 pro - dropbear ssh

This page will describe how to install dropbear on the printer.

Buildroot options:

For dropbear we need a statically linked file. See here for more details how to setup accordingly.

Also see Chapter 17. Adding support for a particular board in the buildroot documentation. There it explains how to create a template for a new board.

In the ELF file of the play application, following library defines are shown:

        000107c6 ds "GCC_3.5"
        000107ce ds "GLIBC_2.4"
        000107d8 ds "CXXABI_1.3"
        000107e3 ds "GLIBCXX_3.4"

Auditeon