projects:3dprinting:anycubic_i3_mega
This is an old revision of the document!
Modifications for the ANYCUBIC I3 MEGA 3d printer
This page lists modification guides for the ANYCUBIC I3 MEGA
Wiring modification guide
Antclaps BLTouch retrofit guide and configuration information:
Further information
- Heatbed temperature sensor: Atmega2560, Pin 83 (Analog 14), with external pull-up of 4k7
- Etc.
projects/3dprinting/anycubic_i3_mega.1583966496.txt.gz · Last modified: 2020/03/11 23:41 by admin