projects:3dprinting:anycubic_i3_mega

This is an old revision of the document!

Table of Contents

Modifications for the ANYCUBIC I3 MEGA 3d printer

Modifications for the ANYCUBIC I3 MEGA 3d printer

This page lists modification guides for the ANYCUBIC I3 MEGA

Wiring modification guide

* Reverse engineered schematics of I3 MEGA HUB.
* Redesign of I3 MEGA HUB with ESD-protection and D-sub connectors.

Antclaps BLTouch retrofit guide

Antclaps BLTouch retrofit guide and configuration information

How to retrofit the printer with an ANTCLABS BLTouch leveller

Installing and adapting Guide for Marlin firmware

Download and adapt (Marlin based) firmware for the BLTouch

Cura BLTouch and Profile settings

Cura BLTouch and profile settings

Redrex extruder upgrade kit

Redrex extruder upgrade kit

Anycubic I3 Mega with cable chain

Adding cable chains

Replacing the ATMEGA2560

Replacing the ATMEGA2560

Further information

Heatbed temperature sensor: Atmega2560, Pin 83 (Analog 14), with external pull-up of 4k7
Etc.

projects/3dprinting/anycubic_i3_mega.1604358982.txt.gz · Last modified: 2020/11/03 00:16 by admin